• xiao3xiao posted an update 1 week, 5 days ago

    Basic Info.
    Model NO.:E6C2-CWZ6C 500PRType:Rotary Encoder
    Working Principle:IncrementalReadout Mode:Contact
    Operating System:Magnetoelectric TypeSignal Output:Complementary Push-pull Output
    Axle Sleeve Type:Empty TypeInstallation Form:Axonia
    Brand:IDENCODERAxonia:Clamping Flange Type
    Outer Diameter:25mmTrademark:IDENCODER
    HS Code:8543709990
    Product Description
    ID03-66B10-I1176-1P Incremental Rotary Encoder 66mm Dia Shaft 8E6C2-CWZ6C 1000P Incremental Rotary Encoder 10mm Dia Shaft 8Product Name: E6C2-C
    Product introduction:
    Firm& simple
    Seal bearing, realize drip-proof and oil-proof performance of IP6f4
    Enhance the performance of shaft load resistant, realize radial load of 50N and axial load of 30N.
    The cable leading method is slanting, including transverse and back direction.
    With protection circuit against reversing connection and load short circuit, improve reliability.
    (also has linear driver output) Product Category: Outside diameter 50(slim type) PCB Sensors
    1.Encoding method Incremental
    2.Power supply voltage 5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)E6C2-CWZ1X 500P/R 2M PCB Sensorsdata sheet
    Encoding methodIncremental
    Power supply voltage5 VDC -5% to 5 VDC +5% (ripple (p-p): 5% Max.)
    Current consumption160mA DC Max.
    Inrush currentCurrent: approx. 9 A (Time: approx. 0.3 ms)
    Resolution (Single turn type)500 P/R
    Output phasesA, -A, B, -B, Z and -Z
    Control output (Output type)Line driver output
    Control output (Load current)High level(Io): -20 mA
    Low level(Is): 20 mA
    Control output (Output voltage)Vo: 2.5 V Min.
    Vs: 0.5 V Max.
    Starting positional pointEquipped
    Max. response frequency100 kHz
    Phase difference on output90 DEG -45 to +45 DEG
    Rise and fall times of outputRise time of output: 0.1 us Max.
    Fall time of output: 0.1 us Max.
    (Cable length: 2m, Io: -20mA Is: 20mA)
    Starting torqueRoom temperature: 10 mN.m Max.
    Moment of inertia3*10-7kg.m2 Max.
    Shaft loadingRadial: 50 N
    Thrust: 30 N
    Max. permissible rotation6000 r/min
    Mechanical life expectancy100 million rotations Min.
    Ambient temperatureOperating: -10 to 70 CEL
    Storage: -25 to 85 CEL
    (with no icing or condensation)
    Ambient humidityOperating: 35 to 85 %RH
    Storage: 35 to 85 %RH
    (with no condensation)
    Insulation resistance20 M OHM Min. at 500 VDC between charged parts and the case
    Dielectric strength500 VAC at 50/60 Hz for 1 minute between charged parts and the case
    Vibration resistance10 to 500 Hz, 2-mm or 150m/s2 double amplitude for 11 min 3 times each in X, Y, and Z directions
    Shock resistance1000m/s2 for 3 times each in X, Y, and Z directions
    Degree of protectionIEC60529: IP64
    Company standard: Oil resistance
    Applicable standard (EC Directive (EMC Directive))EMI: EN50081-2
    Emission Enclosure: EN55011 Group 1 classA
    Emission AC mains: EN55011 Group 1 classA
    Immunity ESD: IEC61000-4-2
    Immunity RF-interference: IEC61000-4-3
    Immunity Burst: IEC61000-4-4
    CE marking: Equipped
    Connection methodPre-wired models (Cable length: 2 m)
    Material (case)Zinc alloy
    Material (body)Aluminum
    Material (shaft)SUS420J2
    Tightening torque0.5 N.m Max. (with M4 screw)
    Weight (packed state)approx. 400 g
    AccessoriesInstruction manual
    Incremental Encoder factory